The Potential of Clay Brick Production of Bang Ban District, Phra Nakhon Si Ayutthaya Province
Article Sidebar
Main Article Content
Abstract
This research aims to study the production system, and to assessment the potential of clay bricks production of Bang Ban district, Phra Nakhon Si Ayutthaya province. Data gathering form 28 manufacturers of clay bricks by structured interview form and potential assessment form. Data analysis by using descriptive statistics included frequency and percentage. The results found that brick production by hand and by machine have similar production systems. Except for the production factors showed that the production of bricks with machines has more space for production than necessary for use, and most of the production of bricks with machines have to hire workers. In the production process aspect, it was found that daily productivity of brick production with machines had 2 times higher than the production of bricks by hand. For the outputs of production, it was found that bricks manufactured with machine is certified according to the industrial product standards, and all the production of bricks by hand are a profession that inherits from the parents. The potential of clay bricks production shown that: Clay bricks had low level of production potential all 3 aspects and the overall.
Article Details
บทความที่ได้รับการตีพิมพ์เป็นลิขสิทธิ์ของวารสาร สักทอง : วารสารมนุษยศาสตร์และสังคมศาสตร์ สถาบันวิจัยและพัฒนา มหาวิทยาลับราชภัฏกำแพงเพชร
ข้อคิดเห็นใดๆ ที่ปรากฎในวารสารเป็นวรรณกรรมของผู้เขียนโดยเฉพาะ ซึ่งมหาวิทยาลัยราชภัฏกำแพงเพชรและบรรณาธิการไม่จำเป็นต้องเห็นด้วย
References
Chiang Mai University, Muang District, Chiang Mai Province, Thailand.
Aunkham, C. (2012). Impact management of common brick production on health of the people in Chang Thong village, Suthep sub-district, Mueang Chiang Mai
district. Master's thesis Chiang Mai University, Muang District, Chiang Mai Province, Thailand.
Boonpradap, C. (2009). Factors related to decision making in purchasing brick products of M.O.T. brick factory, Ang Thong province. Master's thesis Valaya
Alongkorn Rajabhat University under the Royal Patronage, Khlong Luang District, Pathum Thani Province, Thailand.
Bunkhao, L., Polraksa, C. & Tippila, J. (2016). Occupational health and safety risk assessment of a red clay brick factory in Warinchamrap district, Ubon Ratchathani
province. Journal of Science and Technology, Ubon Ratchathani University, 18(1), 39-46.
Chaiwong, S. (2003). Contamination of fluoride in soil vegetation and air from brick factories at Bandongchapoo, Thumbol Chlongkhachen, Phijit. Master's thesis
Naresuan University, Mueang District, Phitsanulok Province, Thailand.
Cochran, W.G. (1977). Sampling techniques. (3 rd ed.). New York : John Wiley & Sons.
Janbuala, S., et al. (2011). The development and design for enhance marketing of bricks ceramic products at Middle part of north east province of Thailand.
Bangkok : Suan Dusit University, Faculty of Science and Technology.
Korbuakaew, S. (2009). Industrial production management. Bangkok : Faculty of Industrial Technology, Suan Sunandha Rajabhat University.
Niyomrath, R. (2008). Quality management. Bangkok : Suan Sunandha Rajabhat University, Faculty of Industrial Technology.
Office of the National Economic and Social Advisory Council. (2004). Community economic development policy: One Tambon One Product. Bangkok : Office of the
National Economic and Social Advisory Council.
Office of the Official Information Commission. (2016). Guidelines and criteria for selection of the best One Tambon One Product of the year 2016 (OTOP Product
Champion, OPC). Bangkok : Office of the Permanent Secretary for the Prime Minister.
Ratrung, P. (2014). Effect of corporate social responsibility and marketing strategy toward business operation of clay brick entrepreneurs in Lampang province.
Master's thesis Lampang Rajabhat University, Mueang District, Lampang Province, Thailand.
Ruengpraprapan, C. (2000). Basic statistics with sample analysis using Minitab, SPSS, and SAS program. Khon Kaen : Khon Kaen University.
Srisomsak, C. (2005). Development of burned clay brick mixed with rice husk ash. Master's thesis King Mongkut’s University of Technology Thonburi, Thung Khru
District, Bangkok, Thailand.
Saiyawut, S, et al. (2018). Defect reduction in clay brick production process with modern management techniques. in Walailak University, the proceeding of
Walailak Research national conference, No. 10. 27-28 March 2018. Nakhon Sri Thammarat, Thailand.
Samart, N. (2016). The development of clay bricks quality to community standard with perlite. Master's thesis Ubon Ratchathani Rajabhat University, Mueang
District, Ubon Ratchathani Province, Thailand.
Saweatnai, K & Wongmanee, S.S. (2008). Research and development to increase the efficiency of brick production in industrial level in households and small
establishments. Bangkok : King Mongkut’s University of Technology North Bangkok, College of Industrial Technology.
Sllvannatsiri, R. (2008). A study of manufacturing status and qualities of burned clay brick in the western region of Thailand; A case study in the Kanchanaburi,
Ratchaburi, Nakhonpathom, and Petchaburi Provinces. Master's thesis King Mongkut’s University of Technology Thonburi, Thung Khru District, Bangkok,
Thailand.
Torroungwatthana, N. (2005). Feasibility study of red brick manufacturing in Chiang Rai Province. Master's thesis Chiang Mai University, Muang District, Chiang
Mai Province, Thailand.